Feeding machine_Hunan Shanrui Heavy Industry Technology Co., Ltd.

Contact: Mr. LIU
Mobile Phone：+86138-7350-1194
Contact: Ms. Zhou
Mobile Phone：+86137-6254-7701
Mail box:2236081882@qq.com

Address: Changfu Project Area, Guiyang County Industrial Park, Cangzhou City, Hunan Province

CONTACT US

18169201005

Home page

Product center

Feeding machine

浏览量：

Introduction：

我要询价

DESCRIPTION

working principle

The vibration feeder has simple structure, stable vibration, uniform feeding, good continuous performance and adjustable excitation force; easy to change and control flow at any time, easy to operate; eccentric block is excitation source, low noise, low power consumption, good regulation performance No flushing phenomenon; if closed body is used to prevent dust pollution. The utility model has the advantages of convenient operation, no need for lubrication, low power consumption, and uniform adjustment of the ore supply amount; therefore, it has been widely used. Generally used for loose materials. According to the performance requirements of the equipment, the barrage plate at the bottom of the silo should be set to a sufficient height.

The vibrating feeder can feed the block and granular materials uniformly and continuously from the silo to the receiving device. In the gravel production line, the crusher can be continuously and evenly fed to avoid clogging of the crusher receiving port.

Compared with other feeding equipment, electromagnetic vibrating feeder has the following characteristics:

(1) Small size, light weight, simple structure, convenient installation and maintenance;

(2) Non-rotating parts, no lubrication, no motor and reducer, low operating cost;

(3) Since the feeder uses the resonance principle of mechanical vibration, the double mass works in the low critical near resonance state, so the power consumption is small;

(4) For the electromagnetic vibrating feeder controlled by the thyristor half-wave rectification line, the feeding amount can be adjusted steplessly by adjusting the opening angle of the thyristor, and the centralized control and automatic control of the production process can be realized;

(5) Since the material is continuously thrown up in the feed tank during the feeding process and jumps forward according to the parabolic trajectory, the wear of the feed tank is small.

The main technical parameters

Model	Maximum feed degree(mm)	Processing capacity (t/h)	Motor work rate(kw)	Installation angle（℃)	total weight (kg)	Slot size (mm)	Dimensions (length × width × height)(mm)
ZSW-380×96	500	96-160	11	0	4082	3800×960	3920×1640×1320
ZSW-490×110	630	120-280	15	0	5352	4900×1100	4890×1830×1320
ZSW-600×130	750	400-560	22	0	7800	6000×1300	6082×2580×2083

Model	Max Feed Size (mm)	Capacity(t/h)	Motor Power(kw)	Installation Slope(°)	Double Amplitude(mm)	Weight(kg)
GZT-0724	450	30-80	2×1.5	10	4-6	2936
GZT-0932	560	80-150	2×2.4	10	4-6	3359
GZT-0940	560	80-180	2×3.2	10	4-6	3608
GZT-1148	600	150-300	2×5.5	10	4-6	4808
GZT-1256	800	180-400	2×7.5	10	4-6	5994
GZT-1560	1000	400-600	2×13	10	4-6	9896

Counter-type sand making machine

Tray screen

Feeding machine

Roller

Impact crusher

Recommended Products

Relevant information

Fine sand recycling machine case

2019-04-01 17:08

Impeller sand washing machine case

2019-04-01 17:05

CNC part processing features

2018-01-20 15:56

Create green casting

2018-01-20 15:53

The future development of mining machinery

2018-01-20 15:51

Strengthen fund management, guarantee production and operation

2018-01-20 15:49

Production system goes all out to ensure that orders are completed by quality and quantity

2018-01-20 15:47

Carry forward the spirit of artisans, strive to be a craftsman

2018-01-20 15:45

Online message